Properties

With tough paint film, bearing no pulverization or yellowing;

Have good water, oil and chemical resistant ability.

Provided with excellent anti-weathering   ability, gloss retention and color retention;

Have good low-temperature working   property and adhesive ability.

Designed Applications

Adaptable in many ways, including the   anticorrosive decoration for offshore installations, petroleum and chemical   equipment, bridges, cement plant, power plant, etc.

Color

Various colors

Working Parameters

Lustre

solid volume

Flash point

Drying time 25℃(77℉)

Light

65±3%

29℃(84.2℉)

Surface drying time: 2hrs

Hard drying time: 24hrs

Coating thickness and theoretical coating   ratio

Actual coating ratio            Loss coefficient properly   considered

Intervals of recoating

Suggested times of coating

Airless spraying coating for two times,   dry coating thickness: 60~80 micron

Surface Treatment

Ø     The previous coats should be   completely dry;

Ø     Get rid of the oil stain,   moisture and impurities on the paint film of the previous coatings

Temperature of base material

The temperature of base material must be   higher over 3℃(37.4℉) than the dew point

Usage

Mixing

The product is packed in two containers   separately that form a unit. For use every time, completely and uniformly mix   it according to the specified compounding ratio, then standing time of cure   for 30minutes. The product must be sued up within the specified mixture pot   life.

Mixing ratio

A:B=5.7 : 1（volume ratio）

 A:B=7 : 1（weight ratio）

Time of cure 25℃ (77℉)   30 mins

Pot life:（after mixture）

Ways

of coating

Airless spraying, aerial spraying, brush   painting or roller painting

Airless   spraying

Diluting agent

GLX-8 Thinner

Dosage

15%（weight of paint）

Spray nozzle

calibre

about 0.35~0.45mm (0.014~0.018″)

Spraying pressure

15~17Mpa

(about 150~170Kg/cm²,2100~2200psi   )

Aerial   spraying

Diluting agent

GLX-8 Thinner

Dosage

15%（weight of paint）

Spray nozzle

calibre

2.0~2.5mm (0.079~0.098″)

Air pressure

0.3~0.6MPa(3~6Kg/cm²  42~85psi)

Brushing paint;

Roller

paint

Only suitable for repair and small-area   coating

Cleaning   agent

GLX-8 Thinner

Safety Protection

There should be good ventilating devices   provided at the work site. During working, wear the appliances for labor   protection such as gauze mask, spectacles, gloves, etc. to avoid skin contact   with and suction of solvent or paint fog. Smoking is forbidden at the work   site, and all fire sources shall be isolated.

Former compatible paint

We recommend that this paint should be   used in company with following    products:

If you want to know other kinds of   compatible coating, please   consult the  technical services division in Wuhan Gelin Coating Limited Company.  

Storage and

Packing

Packing

20 kl Group

Ingredient A

20L Pail

Pack

17 kl

Ingredient B

5L Pail

Pack

3 kl

Storage

25℃

(77℉)

12 months (Exceeding storage life,   products should again tested and qualified before use.)

The product should be kept at dry, shaded   place, away from heat sources and fire sources.

Precautions

l           Relative humidity doesn’t   exceed 85% during works and drying solidification period, otherwise it will entail   paint film bubble;

l           Products are out of   restrictions of long-term interval, after completely solidification the   second final coating can be done without mating in sand paper. 

Notice

1. The data in   the Description of Product are merely the instruction for use. This company   will provide technical support and on-site service at the user’s request so   as to ensure the normal proceeding of the working. For non-normal coating and   its application, this Company only guarantees the technical indicators of the   products.    

2. On the basis   of the development of technology, the application of high and new-tech   materials and the user’s requirements, we will improve the compounding   formula and the product quality, and make further amendments in the   Description of Product.